Description
Description. The MAX3320 combines a microprocessor ( P) super- visory circuit with an RS-232 transceiver. The power-on reset performs a single function: it asserts a reset signal whenever the VCC supply voltage declines below a pre- set threshold, staying asserted for at least 100ms after. VCC rises above the reset MAX3320 . . . +3V +5.5V RS-232 . 4 0.1 F . 250kbps . Jul 19, 2005 An RS232 driver, the MAX3320 from Maxim, is assembled on the Base Board. This driver guarantees baudrates up to 250kbps. This port will operate in asynchronous RS232 full-duplex mode. The RS232 port supports minimal hardware control signals, namely RTS and CTS only, and is derived from the 1Mbps RS-232 transceiver has AutoShutdown and 15kV. ESD protection. ( MAX3243E/3244E/3245E). 21. 250kbps RS-232 transceiver adds power-on reset function. ( MAX3320 ). 21. Wireless ICs. Direct-conversion IC tunes DBS television signals. (MAX2102). 22. Image-reject RF transceiver ideal for low-cost 900MHz Dec 22, 2004 Two RS232 Interfaces are realized with two MAX3320 drivers. The signals are routed to the. DB9 connectors. RXD, TXD, RTS# and CTS# lines are routed to the module. The handshake signals of UART1 could also be used as data signals for a 3rd UART2. Both signals are additional connected to a 10pin
Part Number | MAX3320 |
Brand | Maxim |
Image |
MAX3320
MAXI
4705
0.15
Belt (HK) Electronics Co
MAX3320ACAP
MAXIX
213
0.6975
Rotakorn Electronics AB
MAX3320ACAP
MAXMI
2000
1.245
Yingxinyuan INT'L (Group) Limited
MAX3320TCAP
MXAIM
5221
1.7925
HK TWO L ELECTRONIC LIMITED
MAX3323EEUET
MAMIX
2500
2.34
Pivot Technology Co., Ltd.